Why buy a fascia board?

This standard fascia board will help to give your deck the perfect finish.

Fascias conceal and protect the ends of your joist work, giving your deck an attractive and unified appearance with no unsightly gaps or holes.

When buying fascia, please remember you may need to mitre your corners. Alternatively, you can use one of our corner dollies.

Timber is a natural product and is subject to continual movement when exposed to atmospheric conditions. This may be evident with splits, shakes or warping. These are not considered to be a fault or defect. Please allow a small percentage for waste.

Please select how many lengths of fascia you require.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

This saw is brilliant for fine cuts.

It's very comfortable to use and is well balanced.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

These really are the Rolls-Royce of screws!! 

With a high anti-corrosion coating, these decking screws will look good for years without rusting.

With a razor-sharp cut point and ground, serrated lower thread, these screws will not split or splinter the wood even when used at the board's edge.

The non-threaded section of the shank allows the two pieces to be pulled together tightly, and the upper screw thread gives a vice-like effect locking the two boards together. 

A T-STAR plus recess gives excellent torque transmission making these decking screws smooth and easy to drive. Milled ribs on the underside of the head trim away the screw hole, giving a perfectly flush countersink. 

Made in Germany, these decking screws are fast driving, strong and give a neat appearance to your work. 

Comes with a free T20 screwdriver bit. 

When ordering, as a rule of thumb, a 3m x 4m deck requires 400 screws on average.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

These really are the Rolls-Royce of screws!! 

With a high anti-corrosion coating, these decking screws will look good for years without rusting.

With a razor-sharp cut point and ground, serrated lower thread, these screws will not split or splinter the wood even when used at the board's edge.

The non-threaded section of the shank allows the two pieces to be pulled together tightly, and the upper screw thread gives a vice-like effect locking the two boards together. 

A T-STAR plus recess gives excellent torque transmission making these decking screws smooth and easy to drive. Milled ribs on the underside of the head trim away the screw hole, giving a perfectly flush countersink. 

Made in Germany, these decking screws are fast driving, strong and give a neat appearance to your work. 

When ordering, as a rule of thumb, a 3m x 4m deck requires 400 screws on average.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!
 

This really is the Rolls Royce of decking!

Balau hardwood decking is really suited to a country with a climate like ours as it is so hard-wearing, knot-free and very pleasing to the eye with its different shades of orangey browns.

Balau has anti-slip properties, which were originally used for marine decks where water was a problem and also has a natural built-in resistance to fungal decay and insect attack.

Balau is a tropical hardwood. This is a very tight-grained wood, hence very hard-wearing and durable.

This Balau has waxed ends to stop splitting and is also kiln-dried. Don't let anyone tell you this isn't important with Balau. It's critical! Beware of other outlets selling 'Sub-Standard' Balau!

Spax woodscrews should also be used to fasten it down as they will help to keep any splitting to a minimum.

Always keep your Balau dry and away from moisture until it is time to lay it!

It is extremely important that you maintain your hardwood decking; click here to read our full care guide.
You're about to spend good money on your Hardwood Balau. You really MUST oil it. Using Ronseal Decking Oil will really bring the beautiful colours out of the wood, and it won't break the bank!

Please Note: We recommend that you keep your Balau dry and away from moisture until it is time to lay it, as timber is a natural product and is subject to continual movement when exposed to atmospheric conditions

You can now order a sample, and we will endeavour to get it to you overnight.

Timber is a natural product and is subject to continual movement when exposed to atmospheric conditions. This may be evident with splits, shakes or warping. These are not considered to be a fault or defect. Please allow a small percentage for waste.

In most cases, however, small imperfections are generally considered a typical feature of the species.

Please note: This product is supplied dual-sided, with a castle profile on top and smooth or ribbed on the reverse. We only guarantee the castle profile side when purchasing this product. If you wish to purchase a smooth board, please see our Smooth Balau sale in the related items below.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!